Nice one Godzilla... feels so close to being ready now, you must be aching to soak those beans!!!
the very best of electronic karma to you mate!
Moderator: teetee
by teetee » Fri Dec 20, 2013 9:20 pm
by godzilla » Fri Dec 27, 2013 9:51 pm
by LEDDWCRigger » Sat Dec 28, 2013 1:43 am
by teetee » Sat Dec 28, 2013 11:30 am
LEDDWCRigger wrote:Best of luck to you, man! As always, make it work, then make it work better!
by godzilla » Sat Dec 28, 2013 1:27 pm
by teetee » Sat Dec 28, 2013 3:17 pm
by LEDDWCRigger » Sun Dec 29, 2013 12:43 am
by godzilla » Mon Dec 30, 2013 12:28 pm
by ecflouri » Sun Jan 05, 2014 12:56 am
godzilla wrote:well said LEDDWCRigger!
I think that's exactly the problem, the light in there at the moment is not great for pictures. Thankfully I just need to rearrange the lighting, white and grow lighting switch from two separate relays and are controlled by the system, so just need to find a good combo of lamps to aim at target, and configure a little bit. I just had to leave this on the to do list until the crashing issue was solved.
noted the system crashed last night after 55 hours ish. This time it was good since I could debug a bit more and saw that the USB hub seemed to have locked up. even after a reboot of the pi and re-insertion of the hub the connected devices were not accessible, only repowering the hub fixed it. I have heard that some hubs can give stability issues also, so this will be the next thing to be swapped out now.
I think the backpowering and memory were still important before since there has been a big improvement. Two suspects at the moment actually, one of the cameras seemed to be stuck with the blue "in action" light jammed on when it crashed, so hub and camera are suspect. Ill switch out the hub first then re-test to see if the camera goes into that state again. At least these are extra camera's so wont affect the main vid.
by godzilla » Sun Jan 05, 2014 1:56 am
Users browsing this forum: No registered users and 3 guests