Page 1 of 1

Modular Type LED Growlight Strip Down Instructio

PostPosted: Sat Aug 24, 2013 5:03 am
by ledbud
1
Note the 6 securing screws for the faceplate.
Note the 6 securing screws for the faceplate.
This new design of led grow lights are very easy to disassemble to undertake repairs , the securing screws holding the air scoop and faceplate are easily visible from just looking at the grow light.The larger the grow light the bigger the faceplate which in turn means more retaining screws, no matter what the size of the led grow light the screws will always be visible.

Re: Generic Modular Type LED Growlight Strip Down Instructio

PostPosted: Sat Aug 24, 2013 5:05 am
by ledbud
Carefully loosen and remove the air scoop retaining screws.Place the screws you have previously removed in a safe place!

Re: Generic Modular Type LED Growlight Strip Down Instructio

PostPosted: Sat Aug 24, 2013 5:07 am
by ledbud
3) Carefully pull out the air scoop and set aside.

Re: Generic Modular Type LED Growlight Strip Down Instructio

PostPosted: Sat Aug 24, 2013 5:08 am
by ledbud
4) Remove the faceplate to expose the LED arrays. The faceplate is held in place by retaining screws which are visible on the faceplate. Unscrew these screws and place them somewhere safe. The faceplate will now just lift off.The led clusters are now visible along with the secondary lenses

Re: Generic Modular Type LED Growlight Strip Down Instructio

PostPosted: Sat Aug 24, 2013 5:10 am
by ledbud
5) Carefully lift off the secondary lens from the LED cluster base plate and place somewhere safe , a soft towel is ideal as it prevents the lenses from becoming scratched.

Re: Generic Modular Type LED Growlight Strip Down Instructio

PostPosted: Sat Aug 24, 2013 5:10 am
by ledbud
6)
The retaining screws holding the cluster bar are easily visible.
The retaining screws holding the cluster bar are easily visible.
Carefully unscrew the retaining screws and put them in a safe place.

Re: Generic Modular Type LED Growlight Strip Down Instructio

PostPosted: Sat Aug 24, 2013 5:12 am
by ledbud
7)
The retaining screws holding the cluster bar are easily visible.
The retaining screws holding the cluster bar are easily visible.
Carefully unscrew the retaining screws and put them in a safe place.


The internal layout is now visible , the silver rectangular components are the power supplies and also visible are the high power fans

Re: Generic Modular Type LED Growlight Strip Down Instructio

PostPosted: Sat Aug 24, 2013 5:14 am
by ledbud
8)
Secure a new component in position and plug the electrical components together using the plastic electrical connectors you previously unclipped.
9)
Secure the cluster bars back in place again, using the previously removed retaining screws.
10)
Secure the faceplate again, using the previously removed retaining screws and lastly the air scoop is secured in place using the previously removed retaining screws.